The G3 REA-Master Touch is a standalone turbocharger actuator tester and combined advanced programming tool for service personnel and turbocharger repairers.
The tool is operated via a simple to use 5” Full Colour PCAP touch screen interface, with a unique single touch ‘Auto-Detect’ feature to allow simple connection to almost any type of turbocharger actuator.
Also integrated in to the tool is an advanced reprogramming system for the Garrett® Hella REA® actuators, which can be used to do the following:
• Reset the end stop positions.
• Set the minimum flow position.
• Copy the actuator settings from one actuator to another.
• Set the actuator to match a specific G-Number using the built in Database.
To copy the settings from one Hella Actuator to another only requires only
4 touches of the screen and can be completed in less than 20 seconds !
The tool can also be used with some Siemens VDO® type actuators to reset
the end stop positions after either a new actuator is fitted or the
turbocharger has been refurbished.
1 x G3 REA-MasterTouch (245x125x38mm)
6 x Actuator Cables to fit most common actuators
1 x 12V DC 5A PSU with UK / Euro Plug
1 x USB-A to Mini USB-B Lead
1 x Carry Case with Moulded foam insert