G3 min-Flow (Power)
​​​​
Our original flow bench, fully self contained, requires 3 phase power only.
Ideal for workshops which have a limited air supply.
​
The G3-min-Flow (Power) was designed and built in the UK by 3 former Garrett Test Engineers whom have a combined total of 60 years in the Industry.
These highly skilled & experienced engineers have designed this machine with the end user in mind.
No complicated set up, easily managed database and software, simple adaptors which can be easily made by the end user.
​
Features and Benefits
• Fully Self-contained
• Built-in air supply
• Calibrated to UKAS traceable standards
• Calibration test plates provided to easily verify the accuracy of the machine
• Test the minimum flow of any VGT Turbocharger up to 180kg/h
• Quick release mounting flange, complete with four adapters
• G3 REA-Master(USB) Controller included, complete with six cables
• Simple, no nonsense software, with touch screen interface
• Built in database, with c.1700 references
• Plugs directly into any 5-pin 3-phase 16amp (Red) Socket
• Size of 145 x 70 x 130cm (LxWxH) (with feet and backpanel fitted)
• Full CE Accreditation
​
Whats Included
1 x G3-min-Flow(Power) machine
1 x Industrial grade touch-screen monitor
4 x Adapter plates
6 x R.E.A. Cables
1 x Anti-rotation device
1 x C-Spanner
4 x C-Clamps
4 x Calibration Orifice Plates
​​
​
​
​​​
​​G3 min-Flow (Air)
​
Our compact machine, Single phase, requires 7 bar, clean, dry, air supply.
Ideal for workshops with an existing air supply and large receiver.​​
​
The G3-min-Flow (Air) was designed and built in the UK by 3 former Garrett Test Engineers whom have a combined total of 60 years in the Industry.
These highly skilled & experienced engineers have designed this machine with the end user in mind.
No complicated set up, easily managed database and software, simple adaptors which can be easily made by the end user.
​
Features and Benefits
• Compact Design
• Utilises your existing shop air supply, 7 Bar, clean, dry air required*
• Calibrated to UKAS traceable standards
• Calibration test plates provided to easily verify the accuracy of the machine
• Test the minimum flow of any VGT Turbocharger up to 180kg/h*
• Quick release mounting flange, complete with four adapters
• G3 REA-Master(USB) Controller Built-in, complete with six cables
• Simple, no nonsense software, with touch screen interface
• Built in database, with c.1700 references
• Powered by single phase (13a) standard socket
• Size of 75x 70x 130cm (LxWxH) (with feet + Backpanel fitted)
• Full CE Accreditation
​
Whats Included
1 x G3-min-Flow(AIR) machine
1 x Industrial grade touch-screen monitor
4 x Adapter plates
6 x R.E.A. Cables
1 x Anti-rotation device
1 x C-Spanner
4 x C-Clamps
4 x Calibration Orifice Plates
​
​
​​​
​​G3 REA-Master (touch)
​
Electronic actuator controller & programmer.
Unique built-in database.​​​​
​
The G3 REA-Master Touch is a standalone turbocharger actuator tester and combined advanced programming tool for service personnel and turbocharger repairers.
The tool is operated via a simple to use 5” Full Colour PCAP touch screen interface, with a unique single touch ‘Auto-Detect’ feature to allow simple connection to almost any type of turbocharger actuator.
Advanced reprogramming system for the Garrett® Hella REA® actuators...
• Reset the end stop positions.
• Set the minimum flow position.
• Copy the actuator settings from one actuator to another.
• Change various parameters (Direction/Frequencies) *Model dependant
• Built-in-database to match specific G-Numbers
• Full database for Garrett® 712120, 730314, 763797 and 781751 models
​
*NEW Programming system for the latest Hella iUTA® actuators...
• Enabling of new actuators
• Reset the end stop positions.
• Set the minimum flow position.
• Change various parameters (Direction/Frequencies) *Model dependant
Smart PWM programming support for...
Borg Warner/VDO 059145725- / 059198201-
Borg Warner 59001107126
Mando 28235-2A600
Kamtec 5900 and 28235 Series *Model dependant
​
​
Whats Included
1 x G3 REA-MasterTouch (245x125x38mm)
6 x Actuator Cables to fit most common actuators
1 x 12V DC 5A PSU with UK / Euro Plug
1 x USB-A to Mini USB-B Lead
1 x Carry Case with Moulded foam insert
